#

Normas e diretivas

Atuamos em um mercado global regulamentado em diversos países. Por isso, precisamos gerenciar exigências que podem variar bastante entre diferentes países e regiões. O objetivo comum de nossos gestores de produto e serviços é oferecer produtos confiáveis, duráveis e de bom desempenho, sempre respeitando as regulamentações e normas de cada território onde são utilizados.
#
#

Normas e certificações

Tudo o que você precisa saber sobre as normas de EPIs

Reiniciar todos
Filtro
Standards

EN355 ENERGY ABSORBER

Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.

WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.

EN795 2012 ANCHORAGE DEVICES

Element of a fall arrester system to which a personal protective equipment can be fastened.
Type A - NON PPE : Anchor device with one or more stationary anchor points with the need of a structural anchor.
Type B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
Type C - NON PPE : Anchor device employing a flexible anchor line with maximum deviation of 15°.
Type D - NON PPE : Anchor device employing a rigid anchor line with maximum deviation of 15°.
Type E: Anchor device for use on surfaces with a maximum slope of 5°.

EN353-1 MOBILE FALL PROTECTION ON A FIXED LIFELINE

Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.

EN353-2 MOBILE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE

Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.