#

Standarde şi directive

Ne desfășurăm activitatea pe o piață globală reglementată în numeroase țări. Astfel, trebuie să ne confruntăm cu cerințe care pot fi foarte diferite de la o țară sau regiune la alta.
Obiectivul comun al managerilor noștri de produse și al serviciilor noastre este de a oferi produse fiabile, durabile, de înaltă performanță, în conformitate cu reglementările și/sau standardele din fiecare teritoriu în care sunt utilizate.
#
#

Standards and certifications

All you need to know about PPE standards

Reinițializează toate
Filtrare
Standards

EN355 ENERGY ABSORBER

Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.

WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.

EN795 2012 ANCHORAGE DEVICES

Element of a fall arrester system to which a personal protective equipment can be fastened.
Type A - NON PPE : Anchor device with one or more stationary anchor points with the need of a structural anchor.
Type B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
Type C - NON PPE : Anchor device employing a flexible anchor line with maximum deviation of 15°.
Type D - NON PPE : Anchor device employing a rigid anchor line with maximum deviation of 15°.
Type E: Anchor device for use on surfaces with a maximum slope of 5°.

EN353-1 MOBILE FALL PROTECTION ON A FIXED LIFELINE

Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.

EN353-2 MOBILE FALL ARRESTER ON FLEXIBLE ANCHORAGE LINE

Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.