Individual protection against falls from height . Anti-fall systems

Táto norma stanovuje požiadavky na ochranné rukavice, ktoré sa nosia v prostredí produkujúcom ionizujúce žiarenie alebo v prostredí obsahujúcom rádioaktívne látky.

Rukavice chrániace pred rádioaktívnym znečistením musia byť nepriepustné podľa EN374-2.

Rukavice chrániace pred ionizujúcim žiarením musia okrem toho, že sú nepriepustné podľa normy EN374-2, obsahovať aj určité množstvo ťažkých kovov, ako je olovo.

Špecifikácia požiadaviek na bezpečnosť prostriedkov na ochranu zraku a tváre pri zváraní a podobných procesoch (rámy/držiaky filtrov).

Connection element or equipment component. A connector can be karabiner or a snap hook.
Class A: Anchorage connector, automatic lock used as the component and designed to be connected directly to a specific type of anchorage.
Class B: Primary connector with automatic lock used as the component.
Class M: Multi-purpose connector, primary or quick opening, used as a component, which can be loaded along its major axis or minor axis.
Class Q: Quick opening connector used in long-term or permanent applications, screw lock. When completely screwed this part is a supporting part of the
connector.
Class T: Manufactured end connector, automatic lock, designed as part of a subsystem for attachment so that the load is carried in a predetermined direction.

Component of a fall arrest equipment, which guarantees the stop of a fall from a height in safety by reducing the impact of the shock.

WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2 m.

Element of a fall arrester system to which a personal protective equipment can be fastened.
Type A - NON PPE : Anchor device with one or more stationary anchor points with the need of a structural anchor.
Type B: Anchor device with one or more stationary anchor points without the need of a structural anchor.
Type C - NON PPE : Anchor device employing a flexible anchor line with maximum deviation of 15°.
Type D - NON PPE : Anchor device employing a rigid anchor line with maximum deviation of 15°.
Type E: Anchor device for use on surfaces with a maximum slope of 5°.

Equipment consisting of a mobile fall arrester with self-locking, integral with its rigid anchorage line (rail, cable…). An energy reducer can be built-in on the equipment.

Equipment consisting of a mobile fall arrester with self-locking, integral with its flexible anchorage line (rope, cable…). An energy reducer (absorber) can be built-in in the equipment.